AlarmManager-PRO

The AlarmManager is the intelligent alarm control center; here the information of all MultiSensors converges. The AlarmManager is mounted in the server room or rack and forwards all alarm and fault messages to the responsible persons. The configuration is done via a comfortable web interface. All system messages are stored in the internal database.
Connectivity: Radio ZigBee 2.4GHz, Ethernet 10/100Mbit and PoE
Functions: Access Control, Buglar Alarm, Early Fire Detection, Environmental Monitoring, External Alarms, Network Monitoring, Power Monitoring, Video Surveillance
Mounting: Wall Mounting
Software: KentixONE
Variant: Stand-Alone
  • 1 AlarmManager-PRO
  • 1 Zigbee- / 4G-Antenne
  • 1 SlimLine Kabel 3m
  • 1 SIM-Karte
  • Montagematerial
Magnetic holder for Kentix Devices (KAM, KMS, KXP, KPM)
  • Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KAM-BASIC / PRO, KXP-16, KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.

Price after login/registration

Log in or register now
External Magnet Antenna ZigBee® with 2.5m Cable
External magnet-antenna for better gain of ZigBee® (+2dBi) communication (AlarmManager). Cable. 2.5m with connector SMA (Male), suitable for AlarmManager-PRO/BASIC

Price after login/registration

Log in or register now
SYS
Alarm sounder for in-/outdoor installation
  • Sound alarm
  • Red flash LED
  • Protection class IP65
  • Plug'n'Play connection
The alarm siren can be installed inside and outside the building. It is a combination signal transmitter and a decisive component of a fully functioning alarm chain. In the event of an alarm, the siren generates a very loud signal tone of up to 110 dB sound pressure. In addition to the acoustic protection, a visual alarm is triggered by a colored flashing light (flash frequency: 1 Hz) that is visible from far away. Due to the robust ABS housing, the compact alarm can be used outdoors. The connection is made via an RJ45 patch cable (10m included) directly to the Kentix system socket.

Price after login/registration

Log in or register now
19-Inch Mounting Bracket for MultiSensors (Type: KMS-xx)
  • 1-HE mounting bracket
  • Optimal alignment
1-HE mounting bracket made of sheet metal for mounting Kentix MultiSensors in a 19" IT rack. Suitable for mounting of KMS-LAN, KMS-LAN-RF, KMS-RF, KMS-TI, KXP-16, KPM-100. The sensor mounting is done in optimal downward orientation. The rack mounting protects the devices against unauthorized access and eliminates the need for additional cabling in the server room.

Price after login/registration

Log in or register now
SYSPORT
Leakagesensor KLS03
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an AlarmManager, MultiSensor or a SmartPDU directly to the "Kentix system socket". It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Sensor cable

Price after login/registration

Log in or register now
LAN (POE)
Digital I/O-Module with 16-Inputs and Ethernet (PoE)
  • 16 digital inputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

Price after login/registration

Log in or register now
RADIO
BATTERIE
MultiSensor-DOOR
  • Integrated sensors: 6
  • Monitored hazards: 10
  • Wireless (ZigBee®)
  • Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an AlarmManager or MultiSenor-RF/-LAN-RF via ZigBee radio.
Color

Price after login/registration

Log in or register now
LAN (PoE)
SYSPOPRT
KentixONE
MultiSensor-LAN with PoE
  • KentixONE already integrated
  • Integrated sensors: 8
  • Monitored hazards: up to 19
  • Stand-alone - Web server (HTTPS)
  • E-MAIL - SNMP-V2/3
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling. Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
Color

Price after login/registration

Log in or register now
SYSPORT
Dust-Sensor for detection of surface contamination
  • Detects surface contamination
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • Optical sesnsor
The optical DustSensor is used to detect the degree of contamination in data centers, IT racks and distribution boards.It is connected directly to the Kentix system socket via an RJ45 patch cable (5 m included in delivery).The sensitivity can be adjusted directly on the sensor.

Price after login/registration

Log in or register now
SYSPORT
I/O relais adapter for Kentix sytem port
  • I/O adapter
  • 2 digital inputs
  • 2 relay outputs
I/O adapter for connection to Kentix system port for connecting external IN/ OUTPUTS via the system socket2x digital input, 2x relay output

Price after login/registration

Log in or register now
LAN (PoE)
RADIO
SYSPORT
KentixONE
MultiSensor-LAN-RF with PoE
  • KentixONE already integrated
  • Integrated sensors: 8
  • Monitored hazards: up to 19
  • Stand-alone - Web server (HTTPS)
  • E-MAIL - SNMP-V2/3
  • Wireless repeater
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Stand-alone operation via integrated web server, smartphone app or via Ethernet/network connection to Kentix AlarmManager.Integrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, early fire detection (CO), motion, attempted intrusion via vibration/shakingnotification via e-mail/SNMP alarmoptional IP video camera control
Color

Price after login/registration

Log in or register now
RADIO
SYSPORT
MultiSensor-RF with ZigBee-Radio
  • Integrated sensors: 9
  • Monitored hazards: up to 20
  • Wireless (ZigBee®) Repeater
  • Integrated UPS
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Reporting of sensor data via radio to the Kentix AlarmManagerIntegrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, fire, battery degassing, motion, attempted intrusion via vibration/shock.Notification via e-mail/SNMP alarm
Color

Price after login/registration

Log in or register now
RADIO
BATTERY
MultiSensor-RF battery powered with ZigBee-Radio
  • Integrated sensors: 9
  • Monitored hazards: up to 20
  • Wireless (ZigBee®)
  • Battery (2 years)
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Reporting of sensor data via radio to the Kentix AlarmManagerIntegrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, fire, battery degassing, motion, attempted intrusion via vibration/shock.Power supply via Li-Ion battery (runtime up to 2 years)Notification via e-mail/SNMP alarm
Color

Price after login/registration

Log in or register now
LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
Color

Price after login/registration

Log in or register now