Leakagesensor KLS03
SYSPORT
Product number:
KLS03
GTIN/EAN:
4260300580510
Weight:
0.6 kg
The leakage sensor is used to detect water leakage on the floor and is connected to an AlarmManager, MultiSensor or a SmartPDU directly to the "Kentix system socket". It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.
The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.
The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
| Connectivity: | Kentix System Jack RJ45 |
|---|---|
| Functions: | Environmental Monitoring |
| Skill Level: | Medium |
| Variant: | Extension |
- 1 leakage sensor
- 1 connection cable 10m (patch cable)
- 1 housing gland for cascading
LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
- Up to 100 devices (RADIO, LAN)
- Detected threats: up to 40
- Web-Server – KentixONE-GO
- SMS – E-MAIL – PUSH - VDS2465
- LDAP - SNMP - REST-API
- Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
LAN (PoE)
SYSPOPRT
KentixONE
MultiSensor-LAN with PoE
- KentixONE already integrated
- Integrated sensors: 8
- Monitored hazards: up to 19
- Stand-alone - Web server (HTTPS)
- E-MAIL - SNMP-V2/3
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
LAN (PoE)
FUNK
LTE-4G
KentixONE
AlarmManager-PRO
- KentixONE already integrated
- Up to 100 devices (RADIO, LAN)
- Detected threats: up to 40
- Web-Server (HTTPS) – KentixONE-GO
- SMS – E-MAIL – PUSH - VDS2465
- LDAP - SNMP - REST-API
- Room monitoring up to 2.000m²
The AlarmManager is the intelligent alarm control center; here the information of all MultiSensors converges. The AlarmManager is mounted in the server room or rack and forwards all alarm and fault messages to the responsible persons. The configuration is done via a comfortable web interface. All system messages are stored in the internal database.
