Leakage sensor for detecting water and flooding
Sysport (TYPE A)
The leakage sensor is used to detect water leakage on the floor and is connected to an SiteManager or MultiSensor directly to the Kentix system port (TYP A). It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.
The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.
The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
StarterSet SmartMonitoring with MultiSensors (Ethernet-BLE)
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport (TYPE A)
4G-Modem
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.Monitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 250 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via E-MAIL (SSL), SMS or SNMP trap
US$2,015.90
excl. VAT
SiteManager as a hardware appliance for the individual project start
Appliance / Docker
KentixONE
Sysport (TYPE A)
4G-Modem
- Up to 250 devices (LAN/RADIO)
- Detected threats: >40
- Web-Server (HTTPS) – SmartPhone App
- E-MAIL – PUSH - SMS - VDS2465
- LDAP - SNMP-V2/3 - REST-API - Webhooks
High-Performance ARM Quad Core Appliance with KentixONEHigh-performance ARM Quad Core Appliance with KentixONE, Fanless, 2x Ethernet 1GBit/100Mbit (LAN1/2), 2x Kentix system port, SD card slot, nano SIM card slot, integrated 4G modem, dual power supply, Power 24VDC/10Watt, Temperature range 0-55°C, Mounting in 19"-1U or 35mm DIN rail, Size (HxWxD) 111x25x76mm, Scope of delivery: SiteManager, 19" mounting bracket, 4G magnetic base antenna (2m cable length), plug-in power supply 100-230VAC/24VDC, C14 power supply adapter, KentixONE-SIM Karte (DE/AT/CH)
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
US$558.50
excl. VAT
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport (TYPE A)
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 90°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via SiteManager SMS and PUSH.
US$718.07
excl. VAT
Detect water leakage in server room
Early detection of water leaks in the server room prevents potential damage to expensive IT infrastructure and data loss.
Detect water leakage from dishwasher
Water leakage monitoring for dishwashers protects against water damage and helps avoid unplanned repairs.
Detect water leakage on machine
Water leakage monitoring on machines is used to safeguard production processes and prevent expensive production downtime.
Detect water leakage from pipeline
Monitoring water leaks from pipes minimizes water damage and increases safety in buildings.Delivery Contents
- 1 leakage sensor
- 1 connection cable 10m (patch cable)
- 1 housing gland for cascading
