Analog-Module with 8-Inputs and 4 digital-outputs and Ethernet (PoE)

The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE.

8 anlog inputs and 4 digital outputs (e.g. air conditioning, UPS system, external sensors, etc.)

Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.
Connectivity: Ethernet 10/100Mbit and PoE
Funktion: External Alarms
Mounting: DIN Rail
Variant: Extension
de

current93612d0c-59d6-4e5f-bfe9-da1b4674ca92PDF-ExportScroll PDF Exporter

Voltage Input Differential

Voltage Input Single Ended

Current Output


Funktionsbeschreibung

Erweiterungsmodul zum Anschluss an den AlarmManager-PRO.

Das Modul erweitert die externen Ein-Ausgänge des AlarmManagers auf zusätzlich 8 analoge Eingänge. Die Kommunikation erfolgt über Ethernet, somit kann das Modul an beliebiger Stelle montiert werden. Die Konfiguration erfolgt in der Softwareoberfläche des AlarmManager-PRO. Das Modul bietet über den integrierten Web-Server eine einfache IP Konfiguration und den Test der Eingänge ohne zusätzliche Software.

Anschlussmöglichkeit

Analoge Sensoren mit:

Spannungsausgang 0-10V (Default)

Stromausgang 4-20mA (Muss per Jumper aktiviert werden)

Digitale Ausgänge:

Open Collector (max. 700mA, 5-50 VDC)

AlarmManager

Anschluss an Kentix AlarmManager-PRO

Konfiguration

Integr. Web-Server (HTTP), Default IP: 192.168.255.1 (Admin/Admin)

Protokolle

KAM-IO Kommunikation über IP-Port: 502 (Default)

Sicherheit

ID, Passwort und IP-Filter

Anschlussklemmen

Steckbare Schraubklemmen für Kabel bis 1mm²

Eingänge

8 Stück differentielle Analogeingänge mit 16-bit Auflösung,

Samplingrate 10Hz und Spannungseingang 0-10V oder Stromeingang 4-20mA, Genauigkeit 0,1%

Isolierung

Ethernet 1,5kVDC, I/O 3,7kVrms

Umgebung

Betriebstemperatur 0°C bis +45°C, Rel. Luftfeuchtigkeit 10-90%

Netzwerk

LAN 10/100 Base-TX

Spannungsversorgung

PoE (Class 1) oder externes Netzteil 12-30VDC, 4.3Watt

Gehäuse

72 x 123 x 35 mm (DIN-Schienen Montage)

Lieferumfang

KIO7017, 3m Patchkabel, Power-Anschlusskabel, Anleitung

Zulassung

CE

Zubehör

Netzteil oder PoE-Injektor falls keine PoE Versorgung vorhanden ist.




en

current93612d0c-59d6-4e5f-bfe9-da1b4674ca92PDF-ExportScroll PDF Exporter

       Frontside                            Backside                               Terminal assignment

Voltage Input Differential

Voltage Input Signal Ended

Current Output


Description

Expansion module for connection to the AlarmManager-PRO.

This module extends the external inputs of the AlarmManager on additional 8 analogue alarm inputs. Communication is via Ethernet, so the module can be mounted anywhere. The configuration is done in the software interface of the AlarmManager-PRO. The module provides a build in web-server for simple IP configuration and testing of the inputs and outputs without any additional software.

Connectivity

Analog sensors with:

Voltage output 0-10V (default)

Current output 4-20mA (must be activated by jumper)

Digital outputs:

Open Collector (max. 700mA, 5-50 VDC)

AlarmManager

Connection to Kentix AlarmManager-PRO

Configuration

Integrated Web-Server (HTTP), Default IP: 192.168.255.1 (Admin/Admin)

Protocols

KAM-IO communication through IP port: 502 (Default)

Security

ID, Password and IP-Filter

Terminals

Pluggable screw-terminal for cables up to 1mm²

Inputs

8 differentially analog inputs with 16 bit resolution

Sampling rate 10 Hz and voltage input 0-10V or power input 4-20mA, accuracy 0,1%

Isolation

Ethernet 1,5kVDC, I/O 3,7kVrms

Environment

Operation temperature 0°C to +45°C, Rel. humidity 10-90%

Network

LAN 10/100 Base-TX

Power supply

PoE (Class 1) or external power supply 12-30VDC, 4.3Watt

Chassis

72 x 123 x 35 mm (DIN-rail mounting)

Content of delivery

KIO7017, 3m patch cable, power supply 24VDC, manual

Approvals

CE

Accessories

Power supply or PoE injector if no PoE supply is available


  • 1 IO module
  • 1 DIN rail adapter
  • 1 SlimLine cable 3m
Cable temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
  • Temperature sensor Pt1000 class B
  • 3 selectable temperature ranges
  • Protection class IP66
  • Temperature sensor with 2m cable length
Sleeve temperature sensor Pt1000 class B with active current (4-20mA) and voltage output (0-10V). Three selectable temperature ranges (-50°C ... + 50°C; 0°C ... + 50°C; 0°C ... +100°C).Housing protection class IP66.Temperature sensor with 2m cable length, sensor sleeve diameter 6mm (V4A).Power supply 24VDC/4mA.For connection to I/O module KIO7017.

Price after login/registration

Log in or register now
Outside temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
  • Temperature sensor Pt1000 class B
  • 3 selectable temperature ranges
  • Protection class IP66
  • Temperature sensor with 2m cable length
PT1000 class B outdoor temperature sensor with active current (4-20mA) and voltage output (0-10V).Three selectable temperature ranges (-50°C ... + 50°C; 0°C ... + 50°C; 0°C ... +100°C).Housing protection IP66.Power supply 24VDC/4mA.For connection to I/O module KIO7017.

Price after login/registration

Log in or register now
LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
Color

Price after login/registration

Log in or register now
LAN (PoE)
FUNK
LTE-4G
KentixONE
AlarmManager-PRO
  • KentixONE already integrated
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server (HTTPS) – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
The AlarmManager is the intelligent alarm control center; here the information of all MultiSensors converges. The AlarmManager is mounted in the server room or rack and forwards all alarm and fault messages to the responsible persons. The configuration is done via a comfortable web interface. All system messages are stored in the internal database.
Color

Price after login/registration

Log in or register now
LAN (POE)
Digital I/O-Module with 16-Inputs and Ethernet (PoE)
  • 16 digital inputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

Price after login/registration

Log in or register now
LAN (POE)
Digital I/O-Module with 8-In-/Outputs and Ethernet (PoE)
  • 8 digital in- and outputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE.8 digital in- and outputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

Price after login/registration

Log in or register now
SYSPORT
I/O relais adapter for Kentix sytem port
  • I/O adapter
  • 2 digital inputs
  • 2 relay outputs
I/O adapter for connection to Kentix system port for connecting external IN/ OUTPUTS via the system socket2x digital input, 2x relay output

Price after login/registration

Log in or register now