MultiSensor-LAN with PoE (Black)

MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling. Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).
Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.
Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
Connectivity: Kentix System Jack RJ45, Ethernet 10/100Mbit and PoE
Funktion: Buglar Alarm, Early Fire Detection, Environmental Monitoring, External Alarms
Mounting: Ceiling Mounting
Software: KentixONE
Variant: Stand-Alone, Extension
de

current93612d0c-59d6-4e5f-bfe9-da1b4674ca92PDF-ExportScroll PDF Exporter

Anschlussmöglichkeit

Stand-Alone Betrieb (Integr. Web-Server)

AlarmManager-PRO

Sensor-Temperatur

Messbereich -20 bis 99°C (Genauigkeit ± 0,5°C)

Sensor - Relative Luftfeuchte

Messbereich 0 bis 100% (Genauigkeit ±3%)

Taupunkt

in °C berechnet

Sensor - Bewegungsmelder

PIR Sensor, Auslösempfindlichkeit einstellbar

Erfassungskegel: ca. 110°

Reichweite: ca. 8m

Sensor - Vibration

3-Achs Vibrationssensor (einstellbar)

Sensor - Kohlenmonoxid (CO)

0-10.000ppm Messung ± 10%

Interne Auslösung: 20-200ppm (0-100%)

Lebensdauer 10 Jahre

Signalgeber

85dB, 2.3kHz

Sensor - Externe Alarmeingänge

2 x Alarm Eingang (z.B. Scharf-Aktiv, Dauer-Aktiv Alarmierung)

Beschaltung Potentialfrei über separaten

KIO3 Power-Adapter

Externe Meldeausgänge

2x Meldeausgang
(z.B. Scharf-Aktiver Alarm, Dauer-Aktiver Alarm

Beschaltung über separaten KIO3 Power-Adapter

LED

ALARM (Rot), RUN (Grün), LINK/ACT an LAN Buchse

LAN

10/100 Mbit LAN Anschluss

Integrierter Web-Server

Ports: Kommunikation / Webinterface: 80, 443

SD Karte

Integrierter Micro SD Kartenhalter als zusätzlicher Speicher für Bildaufzeichnung, bis 128 GB

SNMP (Simple Network Management Protocol)

SNMP V2 (Schreiben/Lesen)

SNMP Traps

Spannungsversorgung über PoE

12-72VAC/DC Leistungsaufnahme ca. 1.5W, PoE Klasse 1

Spannungsvers. über Netzteil

12-32VAC/DC Leistungsaufnahme ca. 1.5W über Systembuchse

KENTIX Systembuchse

RJ45, zur Spannungsversorgung und Anschluss externer Kentix IO-Module (KIO3 Power-Adapter erforderlich)

Gehäuse

Material: PS 90 x 90 x 45 mm Gewicht ca. 100g
Farben: Weiss, Schwarz

Umgebungsbedingungen

Temperatur 0 - 50°C

Luftfeuchte 5-95%, nicht kondensierend

Typen

KMS-LAN-B (Gehäuse Schwarz)

KMS-LAN-W (Gehäuse Weiss)

Lieferumfang

Montagehalter, Montagematerial, SlimLine-Kabel 3m

Zubehör

PoE Injektor (KPOE150S)

Power Adapter mit Netzteil (KIO3)

Leckagesensor (KLS03)

Prüfungen

CE


en

current93612d0c-59d6-4e5f-bfe9-da1b4674ca92PDF-ExportScroll PDF Exporter

Connectable devices

Stand-Alone operation (integrated web server)

AlarmManager-PRO

Sensor - temperature

Range -20 to 99°C / -3 to 210°F (accuracy ± 0,5°)

Sensor - Relative humidity

Range 0 to 100% (accuracy ± 3%)

Dew point

Calculated in °C/°F

Sensor - motion

PIR sensor, trigger sensitivity configurable

Detection cone: approx. 110°

Range: approx. 8m

Sensor - vibration

3 axes vibration sensor (adjustable)

Sensor - carbon monoxide (CO)

0-10.000ppm measurement ± 10%

Internal resolution: 20-200ppm (0-100%)

Lifetime 10 years

Buzzer

85dB, 2.3kHz

Sensor - external alarm input

2 x alarm input (e.g. Armed-Active, Always-Active)

Potential free wiring via separate KIO1/KIO3 power adapter

External alarm output

2x alarm output
(e.g. Armed-Active, Always-Active)

connection via separately available KIO3 power adapter

LED

ALARM (red), RUN (green)

LINK/ACT at the LAN jack

LAN

10/100Mbit LAN connection

Integrated web server

Ports: communication / web interface: 80, 443

SD card

Integrated micro SD card holder as additional storage for image recording, up to 128 GB

SNMP

(Simple Network Management Protocol)

SNMP V2 (write/read)

SNMP Traps

Power supply with PoE

12-72VAC/DC power consumption ca. 1.5W, PoE class 1

Power supply with power supply unit

12-32VAC/DC power consumption ca. 1.5W over system jack

KENTIX system jack

RJ45, for power supply and connection of external IO-modules (KIO1/KIO3 power adapter required)

Chassis

Material: PS 90 x 90 x 45 mm, Weight: approx. 100g

Color: White, Black

Environmental conditions

Temperature 0 - 50°C / 32 - 122°F

Humidity 5-95%, non-condensing

Types

KMS-LAN-B (Chassis Black)

KMS-LAN-W (Chassis White)

Content of delivery

Mount bracket, mount material, slim line cable 3m

Accessories

PoE Injector (KPOE150S)

PowerAdapter with power supply (KIO1, KIO3)

Leakage sensor (KLS03)

Approvals

CE


  • 1 MultiSensor LAN
  • 1 SlimLine cable 3m
  • Mounting material
Magnetic holder for Kentix Devices (KAM, KMS, KXP, KPM)
  • Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KAM-BASIC / PRO, KXP-16, KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.

Price after login/registration

Log in or register now
SYSPORT
Leakagesensor KLS03
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an AlarmManager, MultiSensor or a SmartPDU directly to the "Kentix system socket". It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Sensor cable

Price after login/registration

Log in or register now
LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
Color

Price after login/registration

Log in or register now
19-Inch Mounting Bracket for MultiSensors (Type: KMS-xx)
  • 1-HE mounting bracket
  • Optimal alignment
1-HE mounting bracket made of sheet metal for mounting Kentix MultiSensors in a 19" IT rack. Suitable for mounting of KMS-LAN, KMS-LAN-RF, KMS-RF, KMS-TI, KXP-16, KPM-100. The sensor mounting is done in optimal downward orientation. The rack mounting protects the devices against unauthorized access and eliminates the need for additional cabling in the server room.

Price after login/registration

Log in or register now
SYSPORT
I/O relais adapter for Kentix sytem port
  • I/O adapter
  • 2 digital inputs
  • 2 relay outputs
I/O adapter for connection to Kentix system port for connecting external IN/ OUTPUTS via the system socket2x digital input, 2x relay output

Price after login/registration

Log in or register now
LAN (PoE)
FUNK
LTE-4G
KentixONE
AlarmManager-PRO
  • KentixONE already integrated
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server (HTTPS) – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
The AlarmManager is the intelligent alarm control center; here the information of all MultiSensors converges. The AlarmManager is mounted in the server room or rack and forwards all alarm and fault messages to the responsible persons. The configuration is done via a comfortable web interface. All system messages are stored in the internal database.
Color

Price after login/registration

Log in or register now
POE-Injector with integrated power-plug (EU)
  • PoE injector for power supply
  • Integrated EU plug
For power supply of PoE end devices if no PoE switch is available. Plug & Play, requires no configuration. Operating voltage: 100-240 V ± 10%, 50 Hz (EURO plug), output values: 48V DC, 350 mA, standard: IEEE 802.3af, Ethernet ports: 1 x 10/100 Base-T, 1 x 10/100 Base-T with PoE, housing: plastic, colour: black, dimensions: 45 mm x 85 mm x 66 mm (W x H x D , weight: approx. 96 g, safety: CE

Price after login/registration

Log in or register now
RADIO
SYSPORT
MultiSensor-RF with ZigBee-Radio
  • Integrated sensors: 9
  • Monitored hazards: up to 20
  • Wireless (ZigBee®) Repeater
  • Integrated UPS
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Reporting of sensor data via radio to the Kentix AlarmManagerIntegrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, fire, battery degassing, motion, attempted intrusion via vibration/shock.Notification via e-mail/SNMP alarm
Color

Price after login/registration

Log in or register now
LAN (PoE)
SYSPORT
KentixONE
NEW
MultiSensor-Thermal Image mit 40° optics
  • Integrated sensors: 9
  • Monitored hazards: up to 20
  • 4-factor early fire detection
  • Stand-alone - Web server
  • Email - SNMP alarm
    MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 40°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO),  air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
    Color

    Price after login/registration

    Log in or register now
    RADIO
    BATTERY
    MultiSensor-RF battery powered with ZigBee-Radio
    • Integrated sensors: 9
    • Monitored hazards: up to 20
    • Wireless (ZigBee®)
    • Battery (2 years)
    MultiSensor for monitoring racks and IT rooms up to approx. 20m².Reporting of sensor data via radio to the Kentix AlarmManagerIntegrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, fire, battery degassing, motion, attempted intrusion via vibration/shock.Power supply via Li-Ion battery (runtime up to 2 years)Notification via e-mail/SNMP alarm
    Color

    Price after login/registration

    Log in or register now