MultiSensor-Thermal Image mit 40° optics
LAN (PoE)
SYSPORT
KentixONE
Price after login/registration
Available, delivery time 2-5 Tage
Product number:
KMS-TI-40-B
GTIN/EAN:
4260300588349
Weight:
0.2 kg
MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.
Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRO
Detection angle: 40°
Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.
Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRO
Detection angle: 40°
Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.
Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
| Connectivity: | Ethernet 10/100Mbit and PoE |
|---|---|
| Funktion: | Buglar Alarm, Early Fire Detection, Environmental Monitoring |
| Mounting: | Ceiling Mounting |
| Software: | KentixONE |
| Variant: | Stand-Alone, Extension |
- 1 MultiSensor TI-90
- 1 SlimLine cable 3m
- Mounting material
Magnetic holder for Kentix Devices (KAM, KMS, KXP, KPM)
- Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KAM-BASIC / PRO, KXP-16, KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.
Price after login/registration
SYSPORT
Leakagesensor KLS03
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an AlarmManager, MultiSensor or a SmartPDU directly to the "Kentix system socket". It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Price after login/registration
LAN (PoE)
FUNK
LTE-4G
KentixONE
AlarmManager-PRO
- KentixONE already integrated
- Up to 100 devices (RADIO, LAN)
- Detected threats: up to 40
- Web-Server (HTTPS) – KentixONE-GO
- SMS – E-MAIL – PUSH - VDS2465
- LDAP - SNMP - REST-API
- Room monitoring up to 2.000m²
The AlarmManager is the intelligent alarm control center; here the information of all MultiSensors converges. The AlarmManager is mounted in the server room or rack and forwards all alarm and fault messages to the responsible persons. The configuration is done via a comfortable web interface. All system messages are stored in the internal database.
Price after login/registration
19-Inch Mounting Bracket for MultiSensors (Type: KMS-xx)
- 1-HE mounting bracket
- Optimal alignment
1-HE mounting bracket made of sheet metal for mounting Kentix MultiSensors in a 19" IT rack. Suitable for mounting of KMS-LAN, KMS-LAN-RF, KMS-RF, KMS-TI, KXP-16, KPM-100. The sensor mounting is done in optimal downward orientation. The rack mounting protects the devices against unauthorized access and eliminates the need for additional cabling in the server room.
Price after login/registration
SYSPORT
I/O relais adapter for Kentix sytem port
- I/O adapter
- 2 digital inputs
- 2 relay outputs
I/O adapter for connection to Kentix system port for connecting external IN/ OUTPUTS via the system socket2x digital input, 2x relay output
Price after login/registration
LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
- Up to 100 devices (RADIO, LAN)
- Detected threats: up to 40
- Web-Server – KentixONE-GO
- SMS – E-MAIL – PUSH - VDS2465
- LDAP - SNMP - REST-API
- Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
Price after login/registration
POE-Injector with integrated power-plug (EU)
- PoE injector for power supply
- Integrated EU plug
For power supply of PoE end devices if no PoE switch is available. Plug & Play, requires no configuration. Operating voltage: 100-240 V ± 10%, 50 Hz (EURO plug), output values: 48V DC, 350 mA, standard: IEEE 802.3af, Ethernet ports: 1 x 10/100 Base-T, 1 x 10/100 Base-T with PoE, housing: plastic, colour: black, dimensions: 45 mm x 85 mm x 66 mm (W x H x D , weight: approx. 96 g, safety: CE
Price after login/registration
LAN (PoE)
SYSPOPRT
KentixONE
MultiSensor-LAN with PoE
- KentixONE already integrated
- Integrated sensors: 8
- Monitored hazards: up to 19
- Stand-alone - Web server (HTTPS)
- E-MAIL - SNMP-V2/3
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
Price after login/registration
LAN (PoE)
RADIO
SYSPORT
KentixONE
MultiSensor-LAN-RF with PoE
- KentixONE already integrated
- Integrated sensors: 8
- Monitored hazards: up to 19
- Stand-alone - Web server (HTTPS)
- E-MAIL - SNMP-V2/3
- Wireless repeater
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Stand-alone operation via integrated web server, smartphone app or via Ethernet/network connection to Kentix AlarmManager.Integrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, early fire detection (CO), motion, attempted intrusion via vibration/shakingnotification via e-mail/SNMP alarmoptional IP video camera control
Price after login/registration