Amplifier antenna for DoorLock AccessPoint
Antenna to improve radio-signal, replacing original antenna on the device, Amplification approx. + 5dBi with plug SMA, suitable for: DoorLock AccessPoint KXP-16
Battery dismounting tool for Kentix DoorLock-BASIC
DoorLock-BASIC battery replacement tool for easy removal of the knob housing (ART-NR: KXC-KN1/2) for battery replacement
Battery dismounting tool for Kentix DoorLock-PRO
Dismounting tool for easy dismounting of the DoorLock-PRO knob shell (ART-NO: KXC-KN4) for battery change.
Battery dismounting tool for Kentix DoorLock-RA
Battery dismounting tool for easy unlocking of the cabinet lock (KXC-RA1) battery compartment.
Battery lithium AA-3.6V (DoorLock-RA)
Spare battery for cabinet lock KXC-RA, Lithium-thionyl chloride battery 3.6V, Size: AA, capacity: 2.600 mAh, Weight: 10g, temperature-range: 0-80°C
Battery lithium CR123 (DoorLock-LE)
Lithium batteries for electronic door knob DoorLock-LE. Content of delivery: 1 piece CR 123 (3V)
Cabinet and furniture lock adapter for KXC-KN1/2
Cabinet and furniture lock adapter for radio knob (KXC-KN1 or KXC-KN2) with square 8mm. Suitable for installation in filing cabinets, tool lockers or office furniture. The knob is simply attached.
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with flat front
- Rack lever adapter for RA4
- RITTAL IT racks with TS8 handle
- Flat door
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© TS8 rack system, door with slanted edge
- Rack lever adapter for KXC-RA4
- RITTAL IT racks with TS8 handle
- Door with slanted edge
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: TS, TS IT, SE, PC, IW for door with design bevel, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Cabinet lock adapter for KXC-RA4 for RITTAL© VX rack system
- Rack lever adapter for RA4
- RITTAL VX rack series
- left/right usage
Rack lever adapter for cabinet lock TYPE: KXC-RA4. Can be used for IT cabinets from the manufacturer Rittal GmbH & Co. KG of TYPE: VX for door with/without flat front, door hinge left/right can be used.ATTENTION: Only available in combination with cabinet lever lock KXC-RA4.Exact type testing required before ordering!
Core pulling protection for profile cylinder DoorLock-BASIC (KXC-50/80/140)
Cylinder housing milled 5mm on A-side.Can only be ordered together with article KXC-50/80/140-AABB.IMPORTANT! This article is excluded from exchange.
Desktop USB reader (MIFARE® DESFire®)
Mifare and NFC capable Reader / Writer 13.56MHz,Supported transponders:ISO14443A: MIFARE Classic 1k & 4k, Mini, DESFire, Plus S & X, Pro X, SmartMX, Ultralight, Ultralight C, SLE44R35, SLE66Rxx (my-d move), LEGIC Advant, PayPass,ISO14443B: Calypso, CEPAS, HID iCLASS, Moneo, PicoPass, SRI512, SRT512, SRI4K, SRIX4K,NFCIP-1: Active and passive communication mode peer-to-peer, NFC Forum Tag Type 1-4 Dimensions: 88mm x 56mm x 18mm,Power supply 5V ± 10% via USB,Temperature: -25 ° C up to + 80 ° C (-13 ° F up to 176 ° F) 1),Driver: USB 2.0 Win7, Win 8, XP, Win10, Output format: HEX,Content of delivery: Desktop reader, USB cable 1m
DoorLock-WA1 surface-mounted chassis for Gira S-Color WHITE
Wall-mounted chassis in color WHITE for wall reader KXC-WA1 with Gira S-Color cover. Always order in conjunction with Gira S-Color cover (KXC-WA1-GIRA-S-color)!
DoorLock-WA3 surface-mounted chassis IP44 for touch pad reader
Surface-mounted cover for wall mounted reader KXC-WA3-IP1/2 colored in RAL 9006 (IP54).
KXC-RA Locking lever for rack cabinet lock variant 1
- Locking lever for RA2
- other variants available
KXC-RA Locking lever for rack cabinet lock in variant 1Length: 40,0mmno offset/crank
KXC-RA Locking lever for rack cabinet lock variant 2
KXC-RA Locking lever for rack cabinet lock in variant 2, Length: 32.8mm, 5.2mm offset/crank.
KXC-RA Locking lever for rack cabinet lock variant 3
KXC-RA Locking lever for rack cabinet lock in variant 3, Length: 38.8mm, 9.5mm offset/crank.
Lithium battery CR2-3V (DoorLock-DC)
Lithium batteries for electronic knob DoorLock-DC. Content of delivery: 2pieces CR2 (3V)
Low-Power adapter Kentix DoorLock-DC cylinder
Low-power adapter for electronic knob. Required for emergency opening and battery replacement when the battery is completely empty. Content of delivery: Battery replacement tool, 9V block battery, dismounting tool for front cover
Magnetic foot amplifier antenna for DoorLock access-point with 2.5m cable
External antenna to improve communication,Amplification approx.. + 3dBi, cable: 2.5m with plug SMA,Suitable for: DoorLock AccessPoint KXP-16 or KXP16-RF
Magnetic holder for Kentix Devices (KAM, KMS, KXP, KPM)
- Magnet mounting bracket
Magnetic holder for mounting a Kentix device on metallic surfaces, e.g. in a 19" IT rack. Suitable for KAM-BASIC / PRO, KXP-16, KMS-LAN, KMS-LAN-RF, KMS- RF, KMS-RF-BAT, KMS-TI.
Mastercard set CLONE for Kentix DoorLock radio (MIFARE® DESFire®)
Mastercard duplicate for Kenntic DoorLock system. Contains special coding for the management of lock cylinders. Is the "master key" for the plant. Content of delivery: 1pc. System card, 1pc. Master card, 2pc. Service cards, 2pc. Keyfob, 1pc. Battery dismounting tool. IMPORTANT! Can only be ordered in conjunction with an initial master-card set (KXC-PS1) or as a replacement. When ordering a replacement, verification of the end customer with master-key is required (PDF form).
Mastercard set for Kentix DoorLock radio (MIFARE® DESFire®)
Is required once for each DoorLock system with radio. Contains special coding for managing the locking cylinders and is the "master key" for the system. Scope of delivery: 1 piece system card, 1 piece master card (16-digit system key), 2 pieces service cards (disassembly, battery), 2 pieces RFID key fob, 1 piece battery replacement tool.
Mechanical dummy knob as knob replacement
Mechanical dummy core as a knob replacement for mechn. knob suitable for standard profile cylinder KXC-80/140-AABB for KXC-KN1/2
Mechanical Knob 29mm for KXC-KN4 Series
Mechanical knob for standard profile cylinder KXC-80/140-AABB. Diameter 29mm
Mechanical Knob 29mm Swiss
Mechanical knob for profile cylinder Swiss KXC-80CH/140CH-AABB. Diameter 29mm
Multi Spray Oil for Kentix DoorLock mechanical products, 50ml
MULTI-SPRAY-OIL is a resin- and silicone-free high-performance product based on selected aromatic-free base oils and additives. The multifunctional care and maintenance spray is characterized by its special economic efficiency. Can be used as a lubricant, corrosion protection, creep oil, moisture displacer and cleaner all in one. Follow the care instructions for the individual products! Quantity: 50ml
NFC/RFID transponder set for SmartAccess-NFC
NFC transponder set consisting of: 2x NFC sticker-tag (NTAG216, round size: 40mm, IP67), 2x NFC adhesive-tag, on-metal (NTAG213, size: 27x27x5mm, IP67)
Notöffnungsset für mechn. Notöffnung KXC-RA4 Rackhebel
Notöffnungsset für mechn. Notöffnung des KXC-RA4 Rackhebel im Falle von Stromausfall oder Defekt, Lieferumfang: Notöffnungswerkzeug, 2 Stück Frontfolie
Rack lever adapter for KXC-RA4 Rack lever for IT cabinet manufacturer "VERTIV-KNÜRR", front door
- Rack Lever Adapter for KXC-RA4
- VERTIV VR Racks
- Single door
Rack adapter for cabinet lift-handle TYPE: KXC-RA4 suitable for IT-racks from Type: VR, MIR2 of manufacturer VERTIV-KNUERR. ATTENTION: Only available in combination with cabinet lock KXC-RA4. Exact type testing before ordering necessary.
RFID adhesive transponder card (MIFARE® DESFire® EV1, 4k)
- MIFARE®DESFire®
- RFID adhesive transponders
- Kentix security application
Kentix adhesive transponders are based on MIFARE®DESFire® technology (13.56MHz) of type EV1 with 4kB memory. By default, the tokens are written with a special Kentix security application.
RFID dual-transponder card (MIFARE® DESFire®, EM4200)
- MIFARE®DESFire®
- EM4200
- RFID dual check cards
- Kentix security application
Kentix RFID DualTransponder check cards are based on MIFARE® DESFire® 4k and EM4200. By default, the tokens are written with a special Kentix security application+.
RFID dual-transponder Key-Fob (MIFARE® DESFire®, EM4200)
- MIFARE®DESFire®
- EM4200
- RFID dual key fob
- Kentix security application
Kentix RFID DualTransponder key fobs are based on MIFARE® DESFire® 4k and EM4200. By default, the tokens are written with a special Kentix security application.
RFID transponder card 2k EV2, 25 pieces set (MIFARE® DESFire®)
- MIFARE®DESFire®
- RFID check card (86x54mm)
- Kentix security application
Kentix RFID transponder check card 2k EV2 - 70pF, based on MIFARE®DESFire® technology. By default, the tokens are written with a special Kentix security application, but can also be written with their own security application according to standard.
RFID transponder Key-Fob 2k EV2 (MIFARE® DESFire®)
- MIFARE®DESFire®
- RFID key fob Ø36mm
- Kentix security application
Kentix transponder key fobs are based on MIFARE®DESFire® technology (13.56MHz) type EV2 with 4kB memory. By default, the tokens are written with a special Kentix security application.
RFID transponder Key-Fob 8k, EV2 (MIFARE® DESFire®) for fingerprint-reader
- MIFARE®DESFire®
- 8k EV2
- Key fob
- Kentix security application
Kentix RFID transponder key fobs 8kbyte Speicher EV2 - 70pF, are based on MIFARE®DESFire® technology (13.56MHz). By default, the tokens are written with a special Kentix security application.
Wall mounted reader cover GIRA TX44 ANTHRACITE
- cover for KXC-WA1
- color: ANTHRACITE
- GIRA TX44
Wall mounted reader cover for flush-mounted installation of KXC-WA1 readerType: GIRA TX44color: ANTHRACITE
Wall mounted reader cover GIRA TX44 color ALU
Wall mounted reader cover for flush-mounted installation of KXC-WA1 reader, Type: GIRA TX44 color ALU
Wall mounted reader cover GIRA TX44 distance frame
Distance frame for wall mounted reader cover GIRA TX44
Wall mounted reader cover GIRA TX44 PURE WHITE
Wall mounted reader cover for flush-mounted installation of KXC-WA1 reader, Type: GIRA TX44, color PURE WHITE
Wall mounted reader cover S-Color color BLACK
Wall mounted reader cover for flush-mounted installation of KXC-WA1 reader, Type: GIRA S-Color color BLACK
Wall mounted reader cover S-Color color GREY
Wall mounted reader cover for flush-mounted installation of KXC-WA1 reader, Type: GIRA S-Color color GREY
Wall mounted reader cover S-Color color PURE WHITE
Wall mounted reader cover for flush-mounted installation of KXC-WA1 reader, Type: GIRA S-Color, color PURE WHITE
