External sensors at a glance

In addition to the monitoring areas already covered by the MultiSensors, the possibility of connecting external sensors opens up a multitude of further applications. The connection of external units such as air conditioning systems, mains fuse monitoring, UPS systems or general system fault messages are thus possible. In the usual Kentix consistency, our external sensors are either connected plug 'n' play via the Kentix system socket, or via external I/O modules with Ethernet and POE.
Of course, all modules are monitored by the AlarmManager to prevent failures or sabotage or to report them immediately.

Sensors for water-liquid leakage


The leakage sensor is connected to an AlarmManager or a MultiSensor-LAN/LAN-RF/-TI via Plug 'n' Play and continuously records the conductivity via several electrodes. The connection is made via a standard patch cable and can thus also be easily "patched" into existing cabling. The leakage sensor ROPE also has a sensor cable whose integrated sensors detect water ingress at an early stage along the entire length of the ROPE cable. The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.

SYS
Leakagesensor KLS03
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break

Price on request

SYS
Leakagesensor KLS03-ROPE with 10m rope-sensor
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break

Price on request

SYS
Leakagesensor KLS03-ROPE with 20m rope-sensor
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break

Price on request

I/O expansion modules for AlarmManager (digital)


The I/O expansion modules are used to connect external messages via electrical transfer contacts. This means that, for example, alarm messages from external systems such as generators, UPS systems, air-conditioning systems, etc. can be easily integrated and monitored.

LAN
PoE
Digital I/O-Module for KAM-PRO with 16-Inputs
  • 16 digital inputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet

Price on request

LAN
PoE
Digital I/O-Module for KAM-PRO with 8-In-/Outputs
  • 8 digital in- and outputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet

Price on request

I/O expansion

The I/O expansion module connects to an AlarmManager-PRO and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the web interface of the AlarmManager-PRO. The module offers a simple IP configuration and the test of the inputs/outputs without additional software via the integrated web server. Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

I/O expansion modules for AlarmManager (analogue)


For connecting analogue industrial sensors based on 0-10V or 4-20mA signals. Based on these signal interfaces, there are many individual sensors for almost all applications on the market (gases, fill levels, status values, etc.).

LAN
PoE
Analog-Module for KAM-PRO with 8-Inputs and 4 digital-outputs
  • 8 analog in- and 4 outputs
  • connection of external alarm messages
  • Integrated web server
  • Power over Ethernet

Price on request

Outside temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
  • Temperature sensor Pt1000 class B
  • 3 selectable temperature ranges
  • Protection class IP66
  • Temperature sensor with 2m cable length

Price on request

Cable temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
  • Temperature sensor Pt1000 class B
  • 3 selectable temperature ranges
  • Protection class IP66
  • Temperature sensor with 2m cable length

Price on request

More sensors for Kentix system socket


AlarmManager and almost all MultiSensors are equipped with a Kentix-specific expansion connector with RJ45 socket, the so-called Kentix system socket. Additional external sensors or signals can be connected to this without much effort.

SYS
Dust-Sensor KDS01
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • Optical sesnsor

Price on request

SYS
Magnet Door-Contact, white, 2m cable with RJ45 for Kentix-Systemport
  • Opening detector
  • Connection to system socket
  • Cable length 2m

Price on request

SYS
I/O relais adapter for Kentix sytem port
  • I/O adapter
  • 2 digital inputs
  • 2 relay outputs

Price on request