What do you want to secure?
Our Solution-Finder makes it easy for you to find the right products for your requirements. Simply select what you want to secure. You will be surprised how few products you need for this!
We have found suitable products for your requirements
Our products for your application
Dual SmartPDU 40U with 2x 24/C13 (IEC60320), 16A (A+B) with RCM
KentixONE
LAN (PoE)
MID approved
- KentixONE already integrated
- Calibrated dual current measurement
- RCM differential current measurement
- Web-GUI, SNMP V2/3, Rest-API
- RFID Rack locking system connectable
- IEC Lock connector protection
- Network management, cascading
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.
StarterSet SmartMonitoring
KentixONE
LAN (PoE)
Radio (BLE)
Battery
Sysport
4G-Modem
- KentixONE already integrated
- Up to 250 devices (RADIO, LAN)
- Detected threats: up to 37
- Web-Server (HTTPS) – KentixONE-GO
- SMS – E-MAIL – PUSH
- LDAP - SNMP-V2/3 - REST-API
Starter set for entry into Kentix SmartMonitoring technology for seamless room and building monitoring. Expandable at any time with SmartAccess, SmartVideo and SmartPDU devices. Already integrated KentixONE software via web server (HTTPS) and 4G modem for redundant SMS alarming.Monitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 250 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via E-MAIL (SSL), SMS or SNMP trap
€1,895.00
excl. VAT
SmartPDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A with RCM
KentixONE
LAN (PoE)
MID approved
- Calibrated current measurement
- RCM differential current measurement
- Web-GUI, SNMP V2/3, Rest-API
- RFID Rack locking system connectable
- IEC Lock connector protection
- Network management, cascading
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)protection 16A per group (C-type)mains connection IEC60309 connector 32A (ROT) (L1/L2/L3/N/PE/6h)cable connection H07RN-F (6mm2)measurement with MID approvalclass B accuracy (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate control (Temp. Hum / Dew)Network connection RJ45 (PoE Ethernet)Frequency 45-54Hz (0.01Hz)Temperature range -10 to 50 ° CPower supply 230VACPower consumption 22KVAPower consumption approx. 5WSize (LxWxH) 1770x78.1x62. 5mmprotection class IP20
Dual SmartPDU 2HE with 2x 8/C13 (IEC60320), 16A (A+B) with RCM
KentixONE
LAN (PoE)
MID approved
- KentixONE already integrated
- Dual-PDU
- Calibrated total measurement
- RCM residual current measurement
- Temperature, humidity, dew point, vibration
- IEC Lock outlets
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.16xC13 IEC60320 IEC-Lock lockable socketsfuse protection 10A per group (C-type)mains connection 2xC20 (A+B) IEC plugmeasurement with MID approvalAccuracy class B (EN50470-3 MID)two counting ranges display illuminatedAC/DC differential current measurement (RCM)climate monitoring (Temp/Hum/Dew)network connection RJ45 (PoE Ethernet)frequency 45-54Hz (0.01Hz)temperature range -10 to 50°Cpower supply 230/400VACconnected load 4.6KVApower consumption approx. 3Wsize (LxWxH) 483x88x88mmprotection class IP20
StarterSet DoorLock-DC (MIFARE® DESFire, BLE) as wireless access system
KentixONE
LAN (PoE)
Radio (BLE)
RFID
- Door knob with radio (IP55)
- AccessManager with LAN (PoE)
- Web-Server (HTTPS) – Smartphone App
- Up to 16 knobs/handles
- LDAP - SNMP-V2/3 - REST-API
With the StarterSets-DoorLock you get all the components you need to lay the foundation for an entire access system. Each of the starter sets enables the management of access authorizations for up to 16 doors. AccessManager and doors can be networked together indefinitely, allowing you to create small and large access systems in no time at all.
The combination of AccessManager, wireless door knob (IP55) and master card set included in the StarterSet-DoorLock contains everything you need to quickly make a door online-capable, except for the mechanical cylinder.Order the matching door cylinder according to the required length at the same time. Use the configurator for cylinders for this purpose.
€945.00
excl. VAT
NEW
Easy
SmartPDU 2HE with 16/C13 (IEC60320), 16A
KentixONE
LAN (PoE)
MID approved
- KentixONE already integrated
- Calibrated total measurement
- RCM residual current measurement
- Temperature, humidity, dew point, vibration
- IEC Lock outlets
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.16xC13 IEC60320 IEC-Lock lockable socketsfuse protection 10A per group (C-type)mains connection C20 IEC plugsingle measurement with MID approvalaccuracy class B (EN50470-3 MID)display illuminatedclimate monitoring (Temp/Hum/Dew)network connection RJ45 (PoE Ethernet)frequency 45-54Hz (0.01Hz)temperature range -10 to 50°Cpower supply 230/400VACconnected load 3.6KVApower consumption approx. 3Wsize (LxWxH) 483x88x88mmprotection class IP20
DoorLock-WA6-IP network reader compact (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID & PIN, 2 factor auth.
- Arm/disarm buttons
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP66
The frame reader is suitable e.g. for electric door openers, electric locks, electric door and gate drives or elevators. Due to its compact design, the reader is especially suitable for use with narrow metal profiles. Two-factor authentication is also possible. The AccessManager SmartRelay (PoE) forms the central unit with network connection. Management takes place centrally through the integrated web server.
DoorLock-WA2-IP network reader Flush-Mount (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP20
StarterSet DoorLock-WA-IP wall reader with RFID reader unit for mounting in switch box (60mm) and standard 55x55mm mounting frame, Ethernet (10/100MBit) with PoE (Class 3), integrated web server with KentixONE (HTTPS), main satellite mode for networking further AccessManagers, operating temperature reader -30 to +70°C, 2 x relay 24VDC/1A, 2 x digital input, Expandable to a total of 2 readers, Scope of delivery: 1x wall reader (IP66), 1x network relay module (IP20), 1x RFID key fob, 1x 3m SlimLine cable.
DoorLock-RA4 Rack-Lift-Handle with PIN LEFT-TURN (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
- RFID & PIN
- LED: RED-GREEN
- Up to 16 Lifthandles/Ethernetport (PoE)
- Chassis: Metal-Plastic
IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
MultiSensor with Ethernet (PoE) and Thermal-Image
KentixONE
LAN (PoE)
Radio (BLE)
Sysport
- Integrated sensors: 9
- Monitored threats: up to 20
- 4-factor early fire detection
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 90°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO), air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
€675.00
excl. VAT
DoorLock-DC radio knob (MIFARE® DESFire®, BLE)
Radio (BLE)
RFID
Battery
- BLE radio (2.4GHz)
- Battery life approx. 4 years
- RFID reader (MIFARE® DESFire®)
- RFID - Smartphone - Smartwatch
The radio door knob can be installed with little effort using a Euro profile cylinder and is suitable for use in all conventional locks for DIN Euro profile. The radio door knob thus offers a cost-effective locking solution for both new buildings and existing properties. Various RFID media in MIFARE® DESFire® technology are available as keys. The power supply is provided by batteries (CR2), which can only be changed or removed with special authorization.
DoorLock-WA3-IP outdoor (IP67) network reader (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP67
StarterSet DoorLock-WA as IP wall reader in weatherproof design (IP67) with RFID reader unit, Ethernet (10/100MBit) with PoE (Class 3), integrated web server with KentixONE (HTTPS), main-satellite mode for networking additional AccessManagers, operating temperature reader -30 to +70°C, 2 x relay 24VDC/1A, 2 x digital input, expandable to a total of 2 readers, scope of delivery: 1x wall reader (IP66), 1x network relay module (IP20), 1x RFID key fob, 1x 3m SlimLine cable
DoorLock-WA3-IP network reader (MIFARE® DESFire)
KentixONE
LAN (PoE)
RFID
PoE-Splitter
- RFID & PIN, 2-factor auth.
- Arm/disarm buttons
- LED: RED-GREEN-YELLOW
- Integrated PoE Splitter 24VDC
- Protection class: IP65
StarterSet consisting of RFID wall reader with illuminated touch PIN keypad and AccessManager (SmartRelay) with Ethernet and PoE (10/100MBit), integrated web server (HTTPS) mit KentixONE, main-satellite mode for networking additional AccessManagers, reader mounting in switch box or surface mount, operating temperature -20°C to +60°C, protection class IP65, 2x relay 24VDC/1A, 2x digital input, expandable to a total of 2x RFID wall readers, scope of delivery: 1x wall reader with touch PIN keypad, 1x surface mount frame, 1x AccessManager (SmartRelay), 1x RFID key fob, 1x 3m SlimLine cable
Passive PDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A
- IEC Lock connector protection
- Lockable circuit breakers
Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320)protection 10A / 16A per group (C-type)mains connection IEC60309 connector 32A (RED) (L1/L2/L3/N/PE/6h)cable connection 3m H05VV-F (6mm2)Temperature range -10 to 50 ° CPower supply 230/400VACmaximum load 17.9KVAPower consumption approx. 20W (full-load)Size (LxWxH) 1770x78.1x62. 5mmprotection class IP20
4MP Varifocal Lens Outdoor (IP66) Dome Network Camera
LAN (PoE)
IR-LED
Motor-Zoom
- 4MP sensor with 2688×1520px
- 2.5x built-in motorized zoom
- Super dynamic range 102dB
- IR LED integrated
- Color night vision (0.019 to 0.3 lx)
- H.265 smart encoding
- Corridor mode (90/270° image rotation
4MP sensor, 2688×1520 pixels image with up to 30fps, Built-in 2.5x motor zoom and motorized focus lens, Viewing angle H100°/V54°, Network 100Mbit (PoE) , Super dynamic range 102dB, Color night vision (0.019 to 0.3 lx), H.265 intelligent coding, Corridor mode (90 degree or 270 degree image rotation), Built-in IR LED, IP66 protection, NDDA compliant, ∅154x103mm, content of delivery: 5MP dome network camera (white).
4MP Varifocal Lens Outdoor (IP66) Bullet Network Camera
LAN (PoE)
IR-LED
Motor-Zoom
- 4MP sensor with 2688×1520px
- 2.5x built-in motorized zoom
- Super dynamic range 102dB
- IR LED integrated
- Color night vision (0.019 to 0.3 lx)
- H.265 smart encoding
- Corridor mode (90/270° image rotation)
4MP sensor, 2688×1520 pixels image with up to 30fps, Built-in 2.5x motor zoom and motorized focus lens, Viewing angle H100°/V54°, Network 100Mbit (PoE) , Super dynamic range 102dB, Color night vision (0.019 to 0.3 lx), H.265 intelligent coding, Corridor mode (90 degree or 270 degree image rotation), Built-in IR LED, IP66 protection, NDDA compliant, 262x112.5x112.5mm, content of delivery: 5MP bullet network camera (white)
MultiSensor-LAN with PoE (Black)
KentixONE
LAN (PoE)
Radio (BLE)
Sysport
- Integrated sensors: 8
- Monitored threats: up to 19
- Web server (HTTPS)
- E-MAIL - SNMP-V2/3 - REST-API
- LAN-RADIO (BLE) repeater integrated
MultiSensor for comprehensive room monitoring of up to 20 hazards. Monitors an area of approx. 20-25m². Connection is via Ethernet with PoE (Class 1) and thus requires no further cabling.
Operation is possible as a stand-alone sensor with already integrated KentixONE software (HTTPS) or via a networked KentixONE system with AlarmManager or SiteManager. It is mounted on the ceiling using the supplied mounting bracket. Optionally, mounting in the IT rack is also possible with the 19" bracket (accessory).Integrated sensors: temperature, humidity, dew point, carbon monoxide sensor (CO), 360° PIR motion sensor, 3-axis G-sensor, digital input/outputs.Also ideal as an independent room sensor to complement network monitoring systems (PRTG, Nagios, CheckMK, etc) via SNMP-V2/3 or REST API. The sensor can also send alarm email in stand-alone mode.
€525.00
excl. VAT
Digital I/O-Module with 16-Inputs and Ethernet (PoE)
LAN (PoE)
- 16 digital inputs
- connection of external alarm messages
- Integrated web server
- Power over ethernet (PoE)
The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs for dry-contacts (e.g. air-conditioning, UPS system, external sensors, etc.)
DoorLock-LE Door handle (MIFARE® DESFire®, BLE)
Radio (BLE)
RFID
Battery
- BLE radio (2.4GHz)
- Battery life approx. 5 years
- RFID reader (MIFARE® DESFire®)
- RFID - smartphone - smartwatch
The radio lever handle is compatible with most European lock standards. It is available in different variants and thus suitable for use in all common doors from wood to steel and aluminum to fire doors. Installation is very simple and can be done without special tools. Operation is intuitive thanks to clear LED signaling. In addition, it offers numerous practical functions such as timers / day releases or continuous engagement.DoorLock-LE Door handle (MIFARE® DESFire®) round rosette (R) incl. mechn. fitting, L-Form (L), Indoor IP55 (I), door handle RIGHT (L), stainless steel door handle
MultiSensor-ROOM (black) battery powered and wireless
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 15
- Wireless (BLE)
- Battery (approx. 4 years)
Wireless MultiSensor for ceiling mounting and monitoring of rooms and areas up to approx. 25m².
The MultiSensor-ROOM is battery operated and has a long battery life of up to 4 years. It is connected to a MultiSensor LAN via radio (BLE).Integrated sensors for: Temperature, humidity, dew point, early fire detection, motion, vibration/shock.
DoorLock-RA radio cabinet lock (MIFARE® DESFire®, 868MHz)
Radio (868MHz)
RFID
Battery
- Connection with AccessManager radio (868MHz)
- Battery life up to 8 years
- Button with LED RED/GREEN
- Different locking levers available
- Locking bolt 14 mm
The wireless cabinet lock offers a simple locking solution for converting data, technical and distribution cabinets. Battery operation reduces installation to a minimum. A lithium AA battery is used as the battery and enables runtimes of up to eight years or 100,000 operations. The battery is mechanically secured against removal (special tool). The lock is supplied with different locking levers and can thus be adapted to almost any distributor.
Alarm sounder for in-/outdoor installation
Sysport
- Sound alarm
- Red flash LED
- Protection class IP65
- Plug'n'Play connection
The alarm siren can be installed inside and outside the building. It is a combination signal transmitter and a decisive component of a fully functioning alarm chain. In the event of an alarm, the siren generates a very loud signal tone of up to 110 dB sound pressure. In addition to the acoustic protection, a visual alarm is triggered by a colored flashing light (flash frequency: 1 Hz) that is visible from far away. Due to the robust ABS housing, the compact alarm can be used outdoors. The connection is made via an RJ45 patch cable (10m included) directly to the Kentix system socket.
Leakagesensor KLS03
Sysport
- Plug 'n Play connection
- Sensor sensitivity adjustable
- 5-fold cascadable
- Monitored for cable break
The leakage sensor is used to detect water leakage on the floor and is connected to an AlarmManager, MultiSensor or a SmartPDU directly to the "Kentix system socket". It continuously detects conductivity via multiple electrodes directly on the housing or additionally via a sensor cable.The sensor has an integrated point sensor with adjustable sensitivity. The versions with sensor cable (KLS03-ROPE-10/20) detect water in addition to the point sensor over the entire sensor cable length (10/20m). The sensitivity of the point sensor is 1-2ml water, the sensitivity of the sensor cable is approx. 10ml water over 20cm cable length.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Temperature sensor IP66 (-50 to + 100 ° C) for KIO7017
- Temperature sensor Pt1000 class B
- 3 selectable temperature ranges
- Protection class IP66
- Temperature sensor with 2m cable length
PT1000 class B outdoor temperature sensor with active current (4-20mA) and voltage output (0-10V).Three selectable temperature ranges (-50°C ... + 50°C; 0°C ... + 50°C; 0°C ... +100°C).Housing protection IP66.Power supply 24VDC/4mA.For connection to I/O module KIO7017.
MultiSensor-DOOR (Black) wireless and battery powered
Radio (BLE)
Battery
- Integrated sensors: 6
- Monitored threats: up to 10
- Wireless (BLE)
- Battery (approx. 4 years)
Ultra-compact MultiSensor for intrusion and status monitoring of doors and windows including ambient monitoring of temperature, humidity and dew point. The sensor is additionally equipped with a 3-axis G-sensor and detects vibration and position changes (sabotage detection, attempted break-in, glass breakage).The MultiSensor-DOOR replaces classic door contacts and can be mounted very easily by gluing or screwing it on. The supplied door/window magnet serves as a counterpart for secure opening detection.The MultiSensor-DOOR is battery operated and has a long battery life (up to four years). It is connected to an MultiSenor-LAN via radio (BLE).
1. Simple system solution
We make the choice easy for you: on the one hand, through the all-in-one Kentix MultiSensor technology, and on the other hand, through the simple integration into your IT environment. This means you can implement even complex requirements with just a few products.
2. Everything fits together
Most Kentix products require only one network connection with PoE. The rest works wirelessly. Kentix products have the software already integrated and can be networked without limits. Everything fits together
3. One software platform
Our solutions run securely "on-premise" at your site and are all based on one software platform, namely KentixONE. This means that the basic functionality is independent of cloud providers. Only our additional service KentixONE-GO for remote access via app and messaging runs as a cloud service.
