Secure data centres with KentixONE


Access - Intrusion - Video surveillance - Environmental monitoring

You need only ONE system


Do you want to keep an uncomplicated eye on your data centre and all associated distributed infrastructures? With KentixONE, the IoT-based software and hardware platform for physical security technology, you can easily secure your entire building against intrusion and unauthorised access and monitor everything via video. All with just one system. KentixONE can be seamlessly integrated thanks to IoT technology, is uncomplicated to operate, always perfectly compatible and limitlessly expandable. This gives you full control and fends off up to 40 threats before damage and loss occur. All products are configured and operated via a uniform web interface. The software and data are yours.


Intrusion alarm
and room surveillance

Network radio based alarm centre
and sensors

With the Kentix Monitoring StarterSets you receive a complete package for a quick introduction to the innovative KentixONE monitoring technology. This allows you to monitor all critical physical hazards with just one system. All data from the MultiSensors is collected and evaluated in the AlarmManager or SiteManager. Use the quick configurator at the bottom of this page for product selection.

LAN (PoE)
FUNK
LTE-4G
SYSPORT
KentixONE
StarterSet SmartMonitoring
  • Up to 100 devices (RADIO, LAN)
  • Detected threats: up to 40
  • Web-Server – KentixONE-GO
  • SMS – E-MAIL – PUSH  - VDS2465
  • LDAP - SNMP - REST-API
  • Room monitoring up to 2.000m²
Starter set for rack and room monitoring, expandable for distributed systems, up to 10,000 m²incl. LTE alarm center and integrated web interface / softwareMonitoring of:Temperature, humidity, climate control, smoldering fire / fire / fire gases (CO), intrusion / unauthorized access, access to unauthorized sub-areas (racks/cabinets), line loss / cable defects, failure of active system components, failure of services (HTTP,SMTP,VPN etc.), defective equipment fans, mains voltage failure, UPS defect failure, UPS remaining runtime and capacity.Possibility to connect up to 500 MultiSensors via radio and LANIntegrated LTE modem with slot for SIM card SNMP for integration into monitoring systemsAlarming via eMail (SSL), SMS or SNMP trap
Color

Price after login/registration

Log in or register now
LAN (PoE)
SYSPOPRT
KentixONE
MultiSensor-LAN with PoE
  • KentixONE already integrated
  • Integrated sensors: 8
  • Monitored hazards: up to 19
  • Stand-alone - Web server (HTTPS)
  • E-MAIL - SNMP-V2/3
MultiSensor for monitoring racks and IT rooms up to approx. 20m².Stand-alone operation via integrated web server, smartphone app or via Ethernet/network connection to Kentix AlarmManager.Integrated sensors with monitoring of:Temperature, humidity, dew point, smoldering fire, early fire detection (CO), motion, attempted intrusion via vibration/shakingnotification via e-mail/SNMP alarmoptional IP video camera control
Color

Price after login/registration

Log in or register now
SYSPORT
Leakagesensor KLS03
  • Plug 'n Play connection
  • Sensor sensitivity adjustable
  • 5-fold cascadable
  • Monitored for cable break
The leakage sensor is connected to an AlarmManager or a MultiSensor-LAN/-RF via Plug'n'Play and continuously records the conductivity via several electrodes.The connection is made via a standard patch cable and can thus also be easily "patched" into existing cabling.The LeakageSensor-ROPE also has a sensor cable whose integrated sensors detect water ingress along the entire rope at an early stage.The leakage sensor can be cascaded up to 5 times and is therefore also suitable for large rooms.
Sensor cable

Price after login/registration

Log in or register now

Early fire detection
with thermal sensors

Detect fires before they start
with the Multisensor TI

With an integrated 1024 px thermal camera and 8 other sensors, the MultiSensor-TI ensures the early detection of more than 20 dangers in IT and technology rooms. Network-compatible with PoE and easy to configure thanks to integrated software (HTTPS). Can be integrated at any time thanks to SNMPv3 and REST API. Use the quick configurator at the bottom of this page for product selection.

LAN (PoE)
SYSPORT
KentixONE
NEW
MultiSensor-Thermal Image mit 40° optics
  • Integrated sensors: 9
  • Monitored hazards: up to 20
  • 4-factor early fire detection
  • Stand-alone - Web server
  • Email - SNMP alarm
    MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 40°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO),  air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
    Color

    Price after login/registration

    Log in or register now
    LAN (PoE)
    SYSPORT
    KentixONE
    NEW
    MultiSensor-Thermal Image with 90° optics
    • Integrated sensors: 9
    • Monitored hazards: up to 20
    • 4-factor early fire detection
    • Stand-alone - Web server
    • Email - SNMP alarm
    MultiSensor with integrated 1024px thermal-cam sensor for 4-factor early fire detection and extented environmental monitoring.Full software on board with integrated web server (HTTPS), standalone operation or connection to Kentix AlarmManager-PRODetection angle: 90°Integrated sensors with monitoring of: Temperature, humidity, dew point, smoldering fire (CO),  air quality, air-pressure, motion, acceleration-vibration (G), two external dry-contacts.Alarm notification via e-mail, SNMP traps (V2/3), web-hooks (REsT-API) or via AlarmManager SMS and PUSH.
    Color

    Price after login/registration

    Log in or register now

    Monitored area according to optics 40°or 90°

    Area calculation

    The Kentix MulitSensor mainapplication is room and system monitoring with 4-factor early fire detection. Which sensor version (40° or 90°) you choose depends largely on the mounting height and the application.

    The 90° sensor is the right solution for 75% of all applications in the area of room and system monitoring. For the monitoring of sections the 40° sensor is the right choice.

    LAN access control

    Network-based RFID readers
    for indoors and outdoors

    Who has access to which room and when? With Kentix SmartAccess you have full (access) control: with different variants of radio-based locking components such as handles, knobs and wall readers as well as individual time-user profiles, you can set up an access solution exactly according to your needs in no time at all. Thanks to KentixONE, you always have an overview of all your rooms - at any time and also while on the move via app for smartphone or tablet. Use the quick configurator at the bottom of this page for product selection.

    LAN (PoE)
    PoE-SPLITTER
    RFID
    KentixONE
    DoorLock-WA3-IP network reader (MIFARE® DESFire)
    • KentixONE already integrated
    • RFID & PIN
    • Arm/disarm alarm buttons
    • LED: RED-GREEN-YELLOW
    • Integrated PoE Splitter 24VDC
    • Protection class: IP44
    The IP wall reader enables access control via RFID medium or alternatively via PIN entry. Two-factor authentication is also possible. The AccessManager SmartRelay (PoE) forms the central unit with network connection. Management takes place centrally via the integrated web server. The SmartRelay communicates with the IP wall reader via a bus connection. This can be easily mounted in the switch box or with a surface-mounted housing (optional) inside the door. With the integrated PoE splitter, the door lock or door opener can be supplied with 24VDC directly from the reader module, so no additional cables are required for the power supply.
    Variant

    Price after login/registration

    Log in or register now
    LAN (PoE)
    PoE-SPLITTER
    RFID
    KentixONE
    NEW
    DoorLock-WA6-IP network reader compact (MIFARE® DESFire)
    • KentixONE already integrated
    • RFID & PIN
    • Arm/disarm alarm buttons
    • LED: RED-GREEN-YELLOW
    • Integrated PoE Splitter 24VDC
    • Protection class: IP66
    The frame reader is suitable e.g. for electric door openers, electric locks, electric door and gate drives or elevators. Due to its compact design, the reader is especially suitable for use with narrow metal profiles. Two-factor authentication is also possible. The AccessManager SmartRelay (PoE) forms the central unit with network connection. Management takes place centrally through the integrated web server.
    Variant

    Price after login/registration

    Log in or register now
    LAN (PoE)
    PoE-SPLITTER
    RFID
    KentixONE
    DoorLock-WA3-IP outdoor (IP66) network reader (MIFARE® DESFire)
    • KentixONE already integrated
    • RFID
    • LED: RED-GREEN
    • Integrated PoE Splitter 24VDC
    • Protection class: IP66
    The IP wall reader enables access control via RFID medium. Wall reader in waterproof housing for outdoor use. Ideal for use in harsh and humid environments in protection class IP66. The AccessManager SmartRelay (PoE) forms the central unit with network connection. Management takes place centrally via the integrated web server. The SmartRelay communicates with the IP wall reader via a bus connection. This can be easily mounted in the switch box or with a surface-mounted housing (optional) inside the door. With the integrated PoE splitter, the door lock or door opener can be supplied with 24VDC directly from the reader module, so no additional cables are required for the power supply.
    Variant

    Price after login/registration

    Log in or register now

    Current and voltage
    monitoring

    With the kentix Smart PDU
    in 40 U and 2 U

    Intelligent, robust and calibrated: that was the formula for the development of our SmartPDU series. Together with long-standing data centre customers, we have developed a PDU that meets the essential requirements of robust and fail-safe power distribution. We have thus fully concentrated on using the most proven components from the field of power distribution. The result is an ultra-robust PDU that meets all requirements for power measurement and monitoring and can be managed via state-of-the-art interfaces (SNMPv2/3, REST API). Use the quick configurator at the bottom of this page for product selection.

    LAN(PoE)
    KentixONE
    MID-APPROVED
    22kW
    SmartPDU 40U with 24/C13-6/C19 (IEC60320), 3-phase 32A with RCM
    • Calibrated current measurement
    • RCM differential current measurement
    • Web-GUI, SNMP V2/3, Rest-API
    • RFID Rack locking system connectable
    • IEC Lock connector protection
    • Network management, cascading
    Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC receptacles IEC lockable (IEC60320)Fuse protection 10A/16A per group (C-type)Mains connection IEC60309 plug 32A (RED) (L1/L2/L3/N/PE/6h)Cable connection 3m H05VV-F (6mm2)Measurement with MID approvalaccuracy class B (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate monitoring (Temp/Hum/Dew)network connection RJ45 (PoE Ethernet)frequency 45-54Hz (0.01Hz)Temperature range -10 to 50°CPower supply 230/400VACConnected load 17.9KVAPower consumption approx. 5WSize (LxWxH) 1770x78.1x62.5mmProtection class IP20

    Price after login/registration

    Log in or register now
    LAN(PoE)
    KentixONE
    MID-APPROVED
    22kW
    SmartPDU 40U with 48/C13-0/C19 (IEC60320), 3-phase 32A with RCM
    • Calibrated current measurement
    • RCM differential current measurement
    • Web-GUI, SNMP V2/3, Rest-API
    • RFID Rack locking system connectable
    • IEC Lock connector protection
    • Network management, cascading
    Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.48xC13 IEC sockets IEC-Lock lockable (IEC60320),protection 10A per group (C-type)mains connection IEC60309 connector 32A (RED) (L1/L2/L3/N/PE/6h)cable connection 3m H05VV-F (6mm2)measurement with MID approvalclass B accuracy (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate control (Temp. Hum / Dew)Network connection RJ45 (PoE Ethernet)Frequency 45-54Hz (0.01Hz)Temperature range -10 to 50 ° CPower supply 230/400VACPower consumption 13.8KVAPower consumption approx. 5WSize (LxWxH) 1770x78.1x62. 5mmprotection class IP20

    Price after login/registration

    Log in or register now
    LAN(PoE)
    KentixONE
    SYSPORT
    MID-APPROVED
    SWITCHED
    22kW
    SmartPDU 40U switchable, metered (MID) with 24/C13-6/C19 (IEC60320), 3-phase 32A with RCM
    • KentixONE already integrated
    • Switchable individual sockets
    • Calibrated total measurement
    • RCM residual current measurement
    • Temperature, humidity, dew point, vibration
    • IEC Lock outlets
    Kentix SmartPDUs are system components for the intelligent expansion of your rack infrastructure. All important sensors and interfaces for future-proof operation are already integrated.24xC13 and 6xC19 IEC sockets IEC-Lock lockable (IEC60320) and switchedLED per outletprotection 16A per group (C-type)mains connection IEC60309 connector 32A (RED) (L1/L2/L3/N/PE/6h)cable connection 3m H05VV-F (6mm2)measurement with MID approval, class B accuracy (EN50470-3 MID)three counting rangesAC/DC differential current measurement (RCM)climate control (Temp. Hum / Dew)Network connection RJ45 (PoE Ethernet)Frequency 45-54Hz (0.01Hz)Temperature range -10 to 50 ° CPower supply 230/400VACmaximum load 22KVAPower consumption approx. 10WSize (LxWxH) 1770x78.1x62. 5mmprotection class IP20

    Price after login/registration

    Log in or register now

    Rack protection

    With the network IT rack handle
    with ergonomic lifting lever and
    online connection

    The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix AccessManager. A door contact can be connected to each IP rack handle, which safely monitors the closing and locking status of the rack door. Power is supplied via PoE and can therefore be easily integrated into the UPS power supply. When connected to the SmartPDU, it takes over the management of the handle and the monitoring of the door contacts. The only other hardware required is a central access manager. Thanks to KentixONE, our locking solutions can be easily integrated into data center automation solutions via the REST API.

    LAN (PoE)
    RFID
    KentixONE
    NEW
    DoorLock-RA4 Rack-Lift-Handle with PIN LEFT-TURN (MIFARE® DESFire)
    • KentixONE already integrated
    • RFID & PIN
    • LED: RED-GREEN
    • Up to 16 Lifthandles/SmartRelay
    • Chassis: Metal-Plastic
    IT cabinet handle (left turning) in robust metal-plastic design as folding lever handle. This means that the handle does not require a swivel range and enables ergonomic handling. The connection is made completely via patch cable. Up to 16 handles can be connected per Kentix SmartRelay. Any number of SmartRelays can be networked together. A reed contact can be connected to a distribution box to each IP rack handle to reliably monitor the closing and locking status of the rack door. The power supply is PoE and is therefore easily integrated into the UPS power supply.
    Variant
    Design

    Price after login/registration

    Log in or register now

    TECH-INFO

    Direction of rotation of the axis for lifting handles

    The KXC-RA4 is available in two axis rotation directions (right/left). Since the lifting handle always performs the same movement, the gear unit or the axis rotation must be set according to the L/R door side.

    Be sure to note the required direction of rotation of the axis when ordering. Easy to remember, the direction of rotation is always the same as the side of the door hinges.

    For the direction of rotation, always look at the back of the door or back of the lever.

    Your personal contact

    Do you have questions or need advice on our products? I am at your disposal around the topics access, video and monitoring and look forward to hearing from you.

    Miguel Marinho

    Miguel Marinho

    Inside Sales Manager

    info@kentix.com
    +49 6781 562510

    Extention sensors for
    external messages

    For the connection, monitoring and visualization of
    external fault messages from air conditioning and
    UPS systems, fuses, etc.

    The I/O expansion module connects to an AlarmManager-PRO and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any be mounted. The configuration is done in the web interface of the AlarmManager-PRO. 16 digital inputs (e.g. air conditioning, UPS system, external sensors, etc.) Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

    LAN (POE)
    Digital I/O-Module with 16-Inputs and Ethernet (PoE)
    • 16 digital inputs
    • connection of external alarm messages
    • Integrated web server
    • Power over Ethernet
    The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE..16 digital inputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

    Price after login/registration

    Log in or register now
    LAN (POE)
    Digital I/O-Module with 8-In-/Outputs and Ethernet (PoE)
    • 8 digital in- and outputs
    • connection of external alarm messages
    • Integrated web server
    • Power over Ethernet
    The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE.8 digital in- and outputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

    Price after login/registration

    Log in or register now
    LAN (POE)
    Analog-Module with 8-Inputs and 4 digital-outputs and Ethernet (PoE)
    • 8 analog in- and 4 outputs
    • connection of external alarm messages
    • Integrated web server
    • Power over Ethernet
    The I/O expansion module connects to an AlarmManager/SiteManager and is used to connect external alarm messages to KentixONE. The communication takes place via Ethernet. Thus, the module can be mounted at any location. The configuration is done in the KentixONE.8 anlog inputs and 4 digital outputs (e.g. air conditioning, UPS system, external sensors, etc.)Up to 32 modules (max. 500 alarm inputs) can be operated on one AlarmManager-PRO.

    Price after login/registration

    Log in or register now

    Video surveillance

    Network cameras
    for inside and outdoors

    The network cameras can be easily integrated into KentixONE and assigned to alarm zones or doors. The camera delivers full HD resolution and is ideal for indoor-outdoor surveillance thanks to its adjustable focal length (FOV 35-95°). In dark light conditions, it captures almost all crucial image details thanks to the LED infrared illuminator (up to 25m). The varifocal lens with remote zoom ensures easy configuration and installation of the network IP camera.

    4MP
    TAG
    NACHT
    IP66
    Network Camera 4MP in Dome Housing (Mobotix)
    • ultra compact dome housing
    • 4MP resolution
    • Day/Night function
    • IP66 protection class
    Dome network camera for integration into Kentix systems. The camera can be easily assigned to alarm zones or doors in AlarmManager or AccessManager. The camera provides images with full HD resolution. Due to the adjustable focal length (FOV 35-95°), the camera is ideal for monitoring IT and technical areas indoors-outdoors. Especially under dark lighting conditions, almost all crucial image details are captured thanks to the LED infrared illuminator. The vario lens with remote zoom ensures easy configuration and installation of the network IP camera. Thanks to the ONVIF standard, it can also be integrated into video management systems.

    Price after login/registration

    Log in or register now
    4MP
    DAY
    NIGHT
    IP66
    Network Camera 4MP in Bullet Housing (Mobotix)
    • ultra compact bullet housing
    • 4MP resolution
    • Day/Night function
    • IP66 protection class
    Bullet network camera for integration into Kentix systems. The camera can be easily assigned to alarm zones or doors in AlarmManager or AccessManager. The camera provides images with full HD resolution. Due to the adjustable focal length (FOV 35-95°), the camera is ideal for monitoring IT and technical areas indoors-outdoors. Especially under dark lighting conditions, almost all crucial image details are captured thanks to the LED infrared illuminator. The varifocal lens with remote zoom ensures easy configuration and installation of the network IP camera. Thanks to the ONVIF standard, it can also be integrated into video management systems.

    Price after login/registration

    Log in or register now

    KentixONE Configurator

    Here is everything you need.